Caring for Your Elemind Headband
To clean your headband, use a damp cloth or alcohol-free face wipe to wipe down the sensor pads on the inside of the headband. We recommend you clean your headband every couple of nights. To clean the cloth surfaces, use the same damp cloth or face wipe to gently dab any area that needs attention.
The sensors, bone conduction driver pad, and processor unit are all permanently contained in the headband construction. Take care not to damage any of the components when cleaning.
CLEANING TIPS:
- DO NOT use cleaners containing alcohol or harsh solvents.
- DO NOT rinse or submerge your headband in water.
- DO NOT scrub the sensor pad surfaces with anything abrasive like a brush or scouring pad.
- DO use a microfiber or similar style cloth or alcohol-free face wipe to clean the headband sensors and cloth surfaces.
- DO clean your headband every couple of days.
Tech Specs
Materials
Fabric: 68% Polyamide, 32% Spandex
Mastoid electrode: Silicone rubber
Weight
60gm
Power
9+ hrs session time, 24+ hr standby time
Full charge in 3 hours
Sensors
5 EEG electrodes (brain sensors)
3D Accelerometer
Bone Conduction Driver
Airplane Mode
The device does not currently have an Airplane Mode, but the BLE chip we use is certified exempt by the FCC, meaning it's not capable of exceeding the safety limits even when operated at max power.